Ball Valve supplier in Australia

Australian Valve is a well-known Ball Valve Supplier in Australia. A ball valve is a type of quarter-turn valve that uses a spherical ball with a hole through its center to control the flow of fluids in a pipeline. Ball valves are widely used in a variety of industries due to their reliability, ease of operation, and ability to provide quick shutoff. The ball is a spherical-shaped component with a hole through its center. When the ball valve is in the open position, the hole in the ball aligns with the pipeline, allowing fluid to flow through. When the valve is closed, the ball is rotated 90 degrees by the valve stem, blocking the flow by aligning the hole perpendicular to the pipeline. The stem is a shaft that connects the ball to the valve actuator. When the stem is turned, it rotates the ball to open or close the valve. The stem also ensures proper alignment of the ball. These have two seats, one on each side of the ball. These seats are usually made of resilient materials like Teflon or other elastomers.
Australian Valve is one of the topmost Globe Valve Supplier in Australia and when the valve is in the closed position, the seats create a tight seal against the ball, preventing leakage. The port is the opening through which fluid flows when the valve is in the open position. Ball valves can have various port configurations, including full port and reduced port. In a full port ball valve, the port size is the same as the pipe diameter, allowing for minimal flow restriction. In a reduced port ball valve, the port size is smaller than the pipe diameter, which may result in some flow restriction.

Advantages:
•Quick Operation
•Tight Shutoff
•Durability
•Versatility

Different types of Ball Valve
•Double block & bleed ball valve
•Forged steel ball valve
•Cast iron and cast steel ball valve
•Floating ball valve
•Heavy duty investment casting ball valve
•Fully welded ball valve
•Top entry ball valve
•Trunnion ball valve
•Jacketed ball valve
•Investment casting ball valve

Industries
•Oil & gas Industry
•Power Industry
•Chemical Industry
•Petrochemical Industry
•Marine Industry
•Mining Industry

Applications
1. Industrial operations
2. Water and wastewater treatment
3. Heating, ventilation, and air conditioning (HVAC) systems
4. Agriculture and irrigation

Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M , F55, F51, F53, Monel, Ductile Iron.
Available Size: ½” to 48”
Class: 150 to 2500
Nominal Pressure: PN10 to PN450
Ends: Flanged, Threaded, Buttweld, Socketweld
Operations: Lever Operated, Electric Actuated and Pneumatic Actuated.